Uncategorized

How to Configure SSID and Password for your Home Wireless Network

For numerous years, the Beacon has run a Tech Talk column, for which Howard Burpee’s Senior Seminar class in Computer Technology would write the columns. Professor Burpee retired last spring and our source of Tech Talk columns dried out as well. As the Beacon wanted to keep Tech Talk alive, we have gone back into our email archives and are now running columns we couldn’t run when we received them initially, because… well, we simply received too many at a time. Please enjoy the “From the Tech Talk Archives”, as it runs throughout the semester. 

So, your grandma came to visit, “what’s the Wi-Fi password?” “I don’t know, that Time Warner guy wrote it down somewhere, let me see if I can find it.” “Well hurry up! Grandma needs to get on Instagram!” After ten minutes of digging through that stack of paper that hasn’t been touched for God knows how many years, you find a coffee stained piece of paper that says “linksys” and a bunch of gibberish under it. Well, it doesn’t have to be this way.

Remember every time you go to a coffee shop or Best Buy, you pull out your phone and search for a Wi-Fi connection, it shows a list of wireless networks with names that actually make sense? This guide will show you how to do just that, customizing your home Wi-Fi’s SSID (broadcast name) and password. And the whole process should take less than five minutes.

First, you need to go to your router’s control panel, if you don’t know what a router is, that’s ok, you won’t need to physically access your router in order to do this. So grab your laptop and go to COMMAND PROMPT, if you have Windows 10, search “cmd” in that circle thing next to your start menu. If you have previous versions of Windows, whether search or run “cmd” inside your start menu. If you have a Mac, best of luck to you… jokes aside, you should be looking for something called “Terminal” on a Mac, but this guide is dedicated to Windows operating systems. Now that you have opened up the command prompt, type in “ipconfig /all”, and hit Enter. You should see a list of info, feel free to pretend you’re a hacker for a second. What “ipconfig /all” does is it displays current TCP/IP network configurations, you need to find a section labeled as “Wireless LAN adapter Wi-Fi:”, or something similar. Inside that section, find “Default Gateway:”, your default gateway should be something like “192.168.x.x”. Copy that number, or write it down, you’ll need it for the next step.

Open up your browser, the browser is the thing you use to go to Google. In the address bar, up top where the url is, copy and paste your default gateway and hit Enter. Now you should be looking at an authentication page, the user name and password are often factory defaults, depending on your router’s manufacturer. The most common ones are “admin” for both the username and password, or “admin” for username and “password” for password, try these first, if they don’t work, do a simple google search. The last resort would be resetting your router or call tech support. After you have logged in, you should be looking at your wireless router’s control panel, most modern routers have a control panel, even the lower end ones should have one for basic configurations. If you are on this step, you are almost finished.

Inside the control panel, things are pretty straight forward, you can look through different tabs, change certain settings if you want to, just don’t mess with anything you aren’t sure about. Every manufacturer has their own control panel interfaces, different models of routers from the same brand might have different interfaces, but they should be very similar. What you are looking for is the wireless settings, for instance, I have a Netgear router, the settings are under the “Wireless” tab, once you go in, you should be able to simply change the SSID (name) and password by typing in a new one. More complex passwords are recommended, such as upper lower case letters, numbers and symbols. Changing the default router logins is also a good idea, you don’t have to, but you should if you know how. After you have done changing the settings, remember to click “apply” or “save”, the router will want to restart after that. After the restart, you will lose internet connection on all of your wirelessly connected devices. Reconnect to your Wi-Fi as you normally would, except this time you are searching for the network you just named, with the password you just set up.

Customizing your wireless network’s SSID and password allows easier access for visitors, easier for you to add a new device, it also enhances security. If you have a wireless network with no password, and suspect your neighbors is leeching your network resources, follow this guide and set up a password ASAP.

Joseph Zhang was a member of the Information Technology Senior Seminar course and is planned on a career in the IT field.

 

Categories: Uncategorized

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s